Product Specifications “Side Access Colonial” 36-gallon Steel Slat Receptacle
All steel extra heavy duty welded construction trash receptacle with side acces and galvanneal spun steel top with two heavy stainless steel cable anchors and heavy duty rotary molded 36-gallon polyethylene liner and anchor kit. Paint with our Zinc Advantage paint system that includes rich primer and super TGIC Polyester paint. Manufactured in Indiana.
Steel receptacle body
Overall size: 42” tall x 29 ½” top ring diameter
Main body 23 1/2” (two rings)
Slat diameter 23”
Slats 3/8" x 1” flat steel
Gap between slats ¾”
Weight (weight is an average with options) 190 pounds
Steel spun top
Diameter: 21 ½”
Material: 16 gauge galvanneal steel (Material thickness may vary during spinning operation)
Design; Centered funnel design to catch trash with the outer surface inclined to eliminate the 60% of precipitation.
36-gallon round heavy rotary molded liner standard, approximately 1/8 thick wall with cut in hand grips and optional drain holes.
Step 1 Sand blast complete unit too shiny metal and clean.
Step 2 Hand clean and inspect.
Step 3 Powder coat with 70% zinc rich primer.
Step 4 Partial oven cure primer.
Step 5 Powder coat with super durable TGIC polyester final coat.
Step 6 Complete oven cure final coat.
Predrilled anchor holes
3/8” zinc plated anchor bolt and lead anchor
3/8” zinc plated flat washer.
Limited twenty-year warranty against structural failure.
Limited one-year warranty against failure of all TGIC polyester painted surfaces.